Rico
Volume: |
20000 Gallons |
Build Type: |
Vinyl |
Added 4 cups of muratic acid. Not sure the strength.
28 oz
of
31.45% (20º Be) Muriatic Acid
High chlorine despite adding 2” of water and then rain adding 2” more. Turned down to 90%
2.5 lbs
of
Dry Stabilizer
3 lbs
of
Dry Stabilizer
1 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
Pool cloudy. Overdue for vacuum and back flush.
3 lbs
of
Dry Stabilizer
Was showing “no flow” again. Had to boost. Need to seal filter gasket
Chlorine well over 7ppm. Reduced power to 25%
Generator had stopped due to low flow. Turned pump to 1950. Left generator at 35%
Stopped count drops after 10ppm. Way high. Dialed back to 35%
2 lbs
of
Dry Stabilizer
Was not generating overnight due to “low flow”
2 lbs
of
Dry Stabilizer
40 lbs
of
Salt
Vacuumed to waste so added about 8-10” of water.
240 lbs
of
Salt
4 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
Chlorine over 25 (by a lot - stopped adding drops)
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
4 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
3 gal
of
Liquid Chlorine
• 10%
3 lbs
of
Dry Stabilizer
Opened green. Pool was near full. Cya may be off as new water has not fully mixed but either way it’s low.
1 gal
of
Liquid Chlorine
• 10%
0.5 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
21 oz
of
31.45% (20º Be) Muriatic Acid
1 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
1.5 gal
of
Liquid Chlorine
• 10%
2 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%
5 gal
of
Liquid Chlorine
• 10%
1 gal
of
Liquid Chlorine
• 10%