daily balancing chlorine and acid for the last two weeks
added half bottle of Jack's Magic Magenta
31 oz of 29% Muriatic Acid
82 oz of Bleach • 10%
1.0
FC
8.0
pH
100
TA
225
CH
30
CYA
85 °F
TEMP
0.39
CSI
24 oz of Baking Soda
5 lbs of Calcium Chloride
3.0
FC
7.5
pH
70
TA
225
CH
20
CYA
88 °F
TEMP
-0.23
CSI
The liquidator has been keeping chlorine levels from 2-6 depending on the day. Have maintained chem levels within tolerances the last two weeks without logging every test. Pool is clear and sparkling even with daily swimming of groups of kids.
29 oz of Bleach • 10.5%
23 oz of 29% Muriatic Acid
2.0
FC
8.0
pH
0.25
CSI
added 3 inch water from hose.
added 8 oz Lo Chlor Metal Out
24 oz of Baking Soda
36 oz of 29% Muriatic Acid
0.5
FC
8.0
pH
70
TA
225
CH
20
CYA
86 °F
TEMP
0.25
CSI
Just returned from vacation fro 10 days. Relied on the Liquidator to keep the chlorine up. Jason and Julien checked on things. The pH was high and chlorine low but the pool was blue and clear. the skimmer traps have greatly reduced bottom debris.
22 oz of 31.45% (20º Be) Muriatic Acid
turned Liquidator off after high test in the morning and retested water around 1pm to see a 3 ppm drop So it looks like I will keep the flow at .5 for a while to see. Problem is that om going on vacation. Will get Riley to retest tonight to see if flow should be increased.
9.0
FC
7.5
pH
-0.20
CSI
added HASA Liquidator tonight, dialing in flow. Looks like the flow indicator will be between 0 and 1 to not over chlorinated the pool. pool spiked to 9 ppm over night after just running it for an hour.
7.0
FC
-0.20
CSI
VacuumedBrushed
15 oz of 31.45% (20º Be) Muriatic Acid
10 oz of Bleach • 10%
3.5
FC
7.6
pH
80
TA
250
CH
30
CYA
82 °F
TEMP
-0.10
CSI
16 oz of Bleach • 10%
1.5
FC
7.6
pH
-0.11
CSI
Now that the pool has stabilized a bit, I am just watching chlorine and pH levels two times per day and adding bleach as needed. given this, I may not track every little addition.
2.5 lbs of Baking Soda
40 oz of Bleach • 10%
2.0
FC
7.3
pH
70
TA
250
CH
25
CYA
86 °F
TEMP
-0.40
CSI
Brushed
VacuumedBrushed
4.5
FC
7.3
pH
85
TA
250
CH
37
CYA
84 °F
TEMP
-0.36
CSI
16 oz of 31.45% (20º Be) Muriatic Acid
VacuumedBrushed
16 oz of Bleach • 10%
2.0
FC
7.5
pH
-0.08
CSI
4.0
FC
7.3
pH
90
TA
250
CH
88 °F
TEMP
-0.27
CSI
lots of rain the last 3 days. supposed to rain everyday this week.
40 oz of Bleach • 10%
1.5
FC
7.2
pH
-0.32
CSI
pool has been brushed and/or brush vacuumed 5 out I'd the last 7 days.
3.0
FC
7.5
pH
-0.03
CSI
16 oz of Bleach • 10%
32 oz of 31.45% (20º Be) Muriatic Acid
3.0
FC
7.7
pH
100
TA
250
CH
28
CYA
88 °F
TEMP
0.17
CSI
5 lbs of Calcium Chloride
1.5 lbs of Dry Stabilizer
2.0
FC
7.2
pH
80
TA
225
CH
18
CYA
89 °F
TEMP
-0.45
CSI
7.0
FC
7.3
pH
80
TA
225
CH
18
CYA
89 °F
TEMP
-0.36
CSI
16 oz of 31.45% (20º Be) Muriatic Acid
24 oz of Bleach • 10%
0.5
FC
7.6
pH
90
TA
250
CH
18
CYA
89 °F
TEMP
0.04
CSI
3 inches of rain fell.... had to drain some of the pool back to mid-tile
8.0
FC
7.3
pH
100
TA
275
CH
22
CYA
87 °F
TEMP
-0.19
CSI
24 oz of 31.45% (20º Be) Muriatic Acid
9.0
FC
7.6
pH
-0.01
CSI
6.0
FC
7.3
pH
90
TA
225
CH
20
CYA
88 °F
TEMP
-0.31
CSI
7.3
pH
-0.32
CSI
Brushed
16 oz of 31.45% (20º Be) Muriatic Acid
4.0
FC
7.5
pH
95
TA
200
CH
15
CYA
88 °F
TEMP
-0.13
CSI
Want to get CYA level to 30. added all 6 pucks to float for the night
16 oz of 31.45% (20º Be) Muriatic Acid
8 oz of Bleach • 10.5%
2.0
FC
7.8
pH
95
TA
250
CH
18
CYA
88 °F
TEMP
0.26
CSI
1 lbs of Baking Soda
5.0
FC
7.2
pH
75
TA
250
CH
88 °F
TEMP
-0.44
CSI
16 oz of Bleach • 10.5%
1.0
FC
7.6
pH
85
TA
235
CH
89 °F
TEMP
-0.02
CSI
8 oz of 31.45% (20º Be) Muriatic Acid
trichlor pucks added for the morning
2.0
FC
7.8
pH
80
TA
250
CH
20
CYA
87 °F
TEMP
0.16
CSI
8.0
FC
7.5
pH
95
TA
250
CH
85 °F
TEMP
-0.07
CSI
Trichlor float with 2 pucks for the night
2.0
FC
7.4
pH
90
TA
275
CH
18
CYA
88 °F
TEMP
-0.12
CSI
8 oz of 31.45% (20º Be) Muriatic Acid
8 oz of Bleach • 10.5%
lots of playing and aerating the water. want to get the chlorine down and stabilizer up.
8.0
FC
7.4
pH
120
TA
275
CH
18
CYA
88 °F
TEMP
0.01
CSI
came home to swim with the kids. tested water and chlorine was hot. add less next time
10 oz of 31.45% (20º Be) Muriatic Acid
16 oz of Bleach • 10.5%
3.0
FC
7.4
pH
-0.13
CSI
in an effort to not drop below 2 ppm in chlorine and not raise above 7.4 in pH, I added both. Pump is running 24/7 as instructed by NPC.
8.0
FC
7.2
pH
100
TA
250
CH
20
CYA
87 °F
TEMP
-0.33
CSI
Brushed
5 lbs of Calcium Chloride
3 lbs of Soda Ash / Washing Soda
After seeing the unscientific approach Cameron took and the shock level numbers, it became obvious that he wasn't following the NPC pool start guidelines. I spent the afternoon rebalancing his work, getting the numbers back to tolerances. I drained the pool twice and added fresh water, raised the pH, dropped the chlorine level, and added calcium.
30.0
FC
6.8
pH
120
TA
150
CH
20
CYA
85 °F
TEMP
-0.87
CSI
32 oz of Dry Stabilizer
2 lbs of Dichlor
2 gal of 31.45% (20º Be) Muriatic Acid
Pool opened today. Cameron from 3 Anchor Bay came and added the chems in the log plus 32 oz. of Lo Clor Metal Gone as a sequester agent.
0.0
FC
8.4
pH
300
TA
175
CH
0
CYA
84 °F
TEMP
1.17
CSI
The pool filled at 2:30. The test shows the balance of the fill water
$9,000.00 on Professional Services
Contractor: Grant Duncan, 3 Anchor Bay Pools. Sub: Abel Jr. at Serrano's Plaster
32 oz
of
31.45% (20º Be) Muriatic Acid
Vacuumed
Brushed
$9,000.00
on
Professional Services